Atlanta Door Corporation
Commercial Service, Installation Wholesale Doors
CS Series
CS500 Series Counter Shutters
The Asta Door CS500 Series rolling counter shutter is produced with the highest quality and durabiltiy in the industry.
The CS500 Series provides security with smooth, quiet and effortless operation and comes in three finish options: clear anodized aluminum curtain and guides, painted steel curtain, or stainless curtain.
The CS500 Series is the perfect choice for pharmacies, cafeterias, concession areas, ticket counters, nurse/hospital desks and more.
The CS500 Series is available in the following models:
- CS522 painted steel
- CS544 aluminum
- CS566 stainless steel
- Slats: Profile 1 1/2" high by 1/2" deep. Finished options available in .050: clear anodized, extruded interlocking roll formed aluminum slats; 22 gauge galvanized steel slats, galvanized according to ASTM A-653, G90 and finished with baked epoxy primer and polyester finish coat; 22 gauge #4 polished steel.
- Endlocks: Each end of alternate slats to be fitted with nylon endlocks.
- Bottom Bar: Extruded aluminum for alminum and steel curtains. Stainless steel angle for stainless steel curtains. Bottom bar astragal seal provided.
- Guide Assembly: Extruded clear anodized aluminum, two piece box shaped guides for aluminum & steel curtains, #4 stainless steel box shaped guides for stainless steel curtains. All guides with bellmouths and curtain stops.
- Barrell Assembly: Barrell to be steel pipe of diameter and wall thickness to restrict maximum deflection to .03" per foot of door width. Provided with threaded rings or lugs welded to barrel for curtain attachment.
- Springs: Oil tempered grease packed helical torsion springs. Springs are mounted on a steel torsion shaft with a self aligning ball bearing assembly.
- Head Plates: Brackets are fabricated from 1/4" minimum thickness steel plates. Drive and end bracket plate provided with each precision sealed ball bearing assembly.
- Locking: Manual push up shutters with aluminum or steel curtains will have thumb turn locks. Manual push up shutters with stainless steel curtains will have stainless steel slide bolt locks.
- Operation: Manual push up on all standard sizes.
- Hood: Rectangular shape formed of aluminum for aluminum shutters, 24 gauge galvanized steel with baked epoxy primer and polyester finish coat for steel shutters and stainless steel for stainless shutters.
- Finishes: Extruded aluminum curtain guides and bottom bar to be clear anodized aluminum. Steel curtain slats and hood hot-dipped galvanized, per ASTM A-653, G-90, with baked epoxy primer and polyester finish coat in gray and white. Painted curtains furnished with clear anodized aluminum box guides and bottom bar. Stainless shuters furnished with #4 polished curtain guides and bottom bar.
- Gauges: Alumunim curtain only availble in .050" extrusion; steel and stainless steel curtains only available in 22 gauge.
- Operations: Awning crank, in-tube motor operation and outside motor operation are available.
- Locking: Keyed thumb turn locks and cylinder locks are available.
- Finish: Powder coat paint is available.
- Models Models CS522 painted steel, CS544 aluminum & CS566 stainless steel are available.
Color options (front/back) for painted steel counter shutters are: Gray/White. Additional available options are powder coat painted steel curtains, clear anodized aluminum curtains and #4 stainless steel curtains.
Contact us to learn more about our Residential Overhead Garage Doors, Commercial Doors, Specialty Doors and Door Operators. We also offer commercial door repair service.
