7000 Series Fire Rolling Door

commercial rolling overhead door

7000 Series Fire Rated Rolling Door by C.H.I.

The Guardian™ 7000 Fire Door is engineered to meet ever-increasing demands.

These rolling steel doors feature a reliable, safe procedure for frequent drop testing with a U.L. label rated from 3/4-hour to 4-hour protection.

GARAGE DOOR FEATURES

  • Safe, simple, inexpensive, and repeatable drop testing is now made possible in any facility with the flip of a handle
  • No ladders, tools, or equipment are required to drop test and reset Guardian™ Simple Test Fire Doors
  • Installation time is greatly reduced because there is no complicated release and governor assemblies
  • Curtain gauge selection: 22, 20, and 18 gauge galvanized, high tensile steel
  • Slat Profiles: Curved, Flatv
  • Operation: Manual push-up, chain hoist (standard) or motor operation
  • Colors: Pre-painted gray, white, tan, and brown or galvanized finish. Powder-coat options available.
  • Guides mount to approved masonry, steel, and sheet rock jambs
  • Options and accessories available
SLAT PROFILE:
  • Flat Slat (FS) cover 2-1/2” high by ¾” deep
  • Curved Slat (CS) cover 2-5/8” high x 7/8” deep
ENDLOCKS & WINDLOCKS:
  • Malleable, zinc-placted cast iron endlocks and windlocks maintain curtain alignment and increase windload capacity. Galvanized malleable cast endlocks are fastened to every other slat. Windlocks are added as dictated by door size & windload requirement.
  • Windload: To be determined by A.H.J. (Authority Having Jurisdiction). Limited deflection to an amount that prevents curtain from buckling or being blown out of guides.
GAUGE:
  • 22, 20 or 18 gauge interlocking galvanized steel
FINISH:
  • Solid Gray, Gray & White, Tan & White
  • Optional: Stock RAL powder-coat option in 188 colors
  • Slats are hot-dipped galvanized per ASTM A653 A with baked on epoxy primer and polyester finish coat available
VISION PANELS:
  • 5" x 1-1/8"

Garage Door Mounting Options

MOUNTING OPTIONS:
  • Face Mount (E or Z) or Jamb Mount
  • Mount to Steel, Wood or Masonry Jambs
GUIDES:
  • Fabricated from three (minimum 3/16” structural steel angles bolted together to form guide channel.
  • Guide angles include curtain stops & flared guides
  • Hot-dipped or cold sprayed galvanized guides (optional)
  • Upward-expanding guides may be welded to approved steel construction
HEADPLATES:
  • Fabricated from minimum 1/4” steel plate.
  • Drive side of barrel to be provided with precision sealed ball bearing in cast iron housing

Garage Door Optional Accessories

HOOD:
  • Fabricated from minimum 24-gauge galvanized steel sheet shaped to fit within the headplates. Intermediate hood support(s) furnished as required.
  • Chain hoist doors operated doors furnished with chain hoist keeper suitable for padlocking. Plated slide locks optional.

Manufacture Term: 

Main Office - ADC North

770-975-3500

  • 4255 McEver Industrial Drive
  • Acworth, GA 30101
  • Fax: 770-974-1455

Fayetteville ADC-South

770-716-3181

  • 500 Marksmen Court
  • Fayetteville, GA 30214
  • Fax: 770-716-3171

Socialize with us

               


The leader in Commercial Overhead Doors!






Google+ Atlanta Door Corp on google+
Go to top